If you just changed your own oil or had a shop do it, the wrench icon on your dash might still be glowing. That’s not a fault, it’s just Toyota’s mileage-based reminder waiting to be cleared manually.
The reset itself takes seconds once you know where the button sits on your generation of Camry. The part that actually matters is making sure the service behind the light happened, since the reminder has no way of checking that for you.
This guide walks through the reset steps, notes where they differ by generation, and covers what to do if the light won’t clear.
Quick Answer: How to Reset the Camry Maintenance Light
- Turn the ignition to ON without starting the engine (or press the start button twice without touching the brake, on push-button models).
- Find the trip meter reset button, usually on the instrument cluster near the odometer.
- Press and hold the button.
- While still holding it, turn the ignition to START, or press the start button once more.
- Keep holding until the wrench icon blinks, then goes off.
- 2007-2011: Set the trip odometer to Trip A, cycle the ignition while holding the trip reset button.
- 2012-2017: Same idea, but the ignition passes through ACC first, and you’ll hear five beeps.
- 2018 and newer: No trip button. You reset it through the Settings menu on the steering wheel display.
The single most common reason this fails on any of these: the trip odometer isn’t on Trip A when you start. If Trip B or the regular odometer is showing, the reset won’t register no matter how correctly you do the rest.
Reset Steps By Camry Generation
| Generation | Years | Dash Type | Reset Button Location |
|---|---|---|---|
| XV70 | 2018-2024 | Digital cluster | Small stalk button on the cluster, right side |
| XV50 | 2012-2017 | Analog with LCD trip screen | Button below the speedometer |
| XV40 | 2007-2011 | Analog with digital odometer | Button on the cluster face, left of the speedometer |
| Pre-2007 | 2006 and older | Analog | Most of these don’t have a maintenance light system at all |
I’ve reset this light on a 2009, a 2015, and a 2021 Camry in my own family. The button always sits somewhere on the cluster, but push-button start models (2018+) need the start button pressed twice instead of a key turn, which trips people up the most.
2007-2011 Camry Models
- Turn the key to ON, don’t start the engine.
- Press the trip button until the display shows Trip A.
- Turn the ignition off.
- Press and hold the trip reset button.
- While still holding it, turn the ignition back to ON.
- The MAINT REQD light will flash fast, and the trip odometer lines will flash too.
- Keep holding until the odometer reads 000000, or the light shuts off.
2012-2017 Camry Models
- Turn the key to ON.
- Set the trip odometer to Trip A.
- Turn the ignition to ACC, not off.
- Hold the trip reset button.
- While holding it, turn the ignition back to ON.
- You’ll hear five long beeps as the light and trip lines flash.
- Keep holding until it reads 000000 or the light clears.
The ACC step is the part people miss coming from the older generation’s steps, since 2007-2011 goes through OFF instead. That’s really the only functional difference between the two.
2018 and Newer (and higher trims of 2012-2017)
These use the multi-info display on the steering wheel instead of the trip button.
- Turn the ignition to ON, engine off.
- Press Pages on the steering wheel pad until “Maintenance Required” shows.
- Press Pages again to reach Settings.
- Press the center button to open the options screen.
- Scroll down to Maintenance Reset and press the center button again.
- You’ll get a prompt asking to confirm the reset.
- Select Yes.
What To Do If The Light Won’t Turn Off
A few things trip people up:
- Letting go too early. Hold the button through the full ignition cycle, not just before or after.
- Doing it with the engine running. The car needs to be in the ON position, not RUNNING.
- Needing more than one cycle. Some Camrys need the whole sequence repeated two or three times before it sticks.
- It’s not actually the maintenance light. If what’s lit is the check engine light instead of the wrench icon, no reset procedure will clear it. That means the car has flagged an actual issue, and it needs a scan tool, not a button.
What the Maintenance Light Actually Means
It’s worth being clear on this: the wrench icon isn’t diagnosing anything. It comes on every 5,000 miles or six months, whichever hits first, and it’s on a timer, not a sensor. Resetting it doesn’t verify the service happened, it just tells the car someone said it did. Treat the interval as your cue for oil changes, inspections, and tire rotation, and check your owner’s manual for the bigger service intervals it doesn’t track.
FAQs
The maintenance light may still be on because it was not manually reset after the oil change. Follow the correct reset steps for your Toyota Camry’s model year.
No. Resetting the maintenance light only turns off the service reminder. It does not erase service records stored in the vehicle or documented by a service center.
Check that the reset procedure was completed correctly. If the light still returns, inspect the oil level and contact a qualified mechanic to get it checked.
Yes, the light can usually be reset without changing the oil. However, you should reset it only after completing the recommended maintenance.
You can usually reset the Toyota Camry maintenance light yourself using the dashboard or steering-wheel controls. A dealer is not normally required unless the light will not reset or another warning appears.
